Horizontal and Vertical Sawmills

Machines for small and medium-sized industries

For over 25 years WIREX has been a leading domestic producer of woodworking machines based solely on band saw applications. The efficiency and reliability of their products have been confirmed with numerous prizes and medals both in Poland and internationally.
As time has passed, WIREX developed other woodworking branches. In 1993 they have launched a lumber mill composed of their sawmills exclusively. Presently, the woodworking machines production department represents 50% of WIREX Group sales. The target market is mostly set on small and medium-sized plants that process annually from 100m3 to 35 000,00 m3.
Applied technologies and solutions are equally advanced if compared to other worldwide manufacturers. What WIREX can warrant is if you decide to purchase one of their products you choose the best quality for a reasonable price. As their goal is customer satisfaction, they are able to adjust to the individual requirements of each and every client.

Wirex machines and devices offer a wide range of advantages, such as:
  • low cost of installation and preparation of place where it is meant to operate
  • power supply for the devices is very low, so there is no need for a transformer station,
  • instant operation on the machine right after installation
  • better quality of sawn timber in comparison to traditional frame sawmills
  • decreased waste amount.
MSGTP Ltd. Wirex - CZ-1 Small

SEE DETAILS

CLICK HERE

Wirex - CZ-1 Small

Horizontal Sawmill - Max. log. diameter 800 mm

Wirex CZ-1 Small is designed for clients who occasionally process small amounts of wood for their own use. Therefore it is a perfect solution for carpenters or farmers. Simplified design, no hydraulic elements or electrical feed result in the low price of the sawmill.

MSGTP Ltd. Wirex - CZ-1 Small

SEE DETAILS

CLICK HERE

Wirex - CZ-1/U Mini

Horizontal Sawmill - Max. log. diameter 800 mm

Wirex CZ-1 U Mini sawmill is a simplified machine designed for cutting logs, without hydraulic elements but with electrical feed. It is a perfect solution for lumber mills that process medium-sized wood, with the occasional need of cutting logs with a bigger diameter – up to 800 mm.

MSGTP Ltd. Wirex - CZ-1/ZM

SEE DETAILS

CLICK HERE

Wirex - CZ-1/ZM

Horizontal Sawmill - Max. log. diameter 1000 mm

Wirex CZ-1/ZM sawmill designed to process round wood into boards, timbers, roof truss, and many other woodworking elements. Its main advantage is the versatility of the application. A wide range of optional equipment allows to flexibly adapt the sawmill to the required working profile, depending on the user’s request.

MSGTP Ltd. Wirex - CZ-1/WZM

SEE DETAILS

CLICK HERE

Wirex - CZ-1/WZM

Horizontal Sawmill - Max. log. diameter 800 mm

Wirex CZ-1/WZM sawmill developed in cooperation with our long-term customers, who for many years have been working on our basic sawmill CZ-1/ZMCZ-1/WZM is our response to market requirements for industrial machines that would work faster and will be more efficient.

MSGTP Ltd. Wirex - CZ-1 Big

SEE DETAILS

CLICK HERE

Wirex - CZ-1 Big

Horizontal Sawmill - Max. log. diameter 1300 mm

Wirex CZ-1 Big sawmill, designed to process round wood of any length with diameter up to 1300 mm. Basic version is not equipped with loading arm, as in case of large logs with diameter more than 1000 mm it is highly recommended to apply loading ramp.

MSGTP Ltd. Wirex - CZ-1 Mobile

SEE DETAILS

CLICK HERE

Wirex - CZ-1M Mobile

Horizontal Sawmill - Max. log. diameter 1000 mm

Wirex CZ-1 Mobile sawmill is a professional device on wheels for round wood processing. The basic version is equipped with hydraulic elements that facilitate log handling. This machine allows working not only at one’s plant but also at any other location, such as forest or construction site, etc.

MSGTP Ltd. Wirex - CZ-1U Mobile

SEE DETAILS

CLICK HERE

Wirex - CZ-1/U Mobile

Horizontal Sawmill - Max. log. diameter 800 mm

Wirex CZ-1 U mobile sawmill is a simplified version of CZ-1/M and designed to process logs. Its construction allows cutting round wood with a diameter of up to 800 mm. There are also hydraulic elements that facilitate log handling. One mobile axis enables a smooth shift of location.

MSGTP Ltd. Wirex - CZ-2

SEE DETAILS

CLICK HERE

Wirex - CZ-2

Horizontal Sawmill - 2 x 5,5 kW

Wirex CZ-2 horizontal sawmill is designed to process two- or three-sided flitches into planks or scantlings. The machine may be a substitute for a multi rip saw when cutting pallet planks – a substitute that significantly decreases the amount of waste/sawdust (thickness of kerf ca. 2 ÷ 2,5 mm)

MSGTP Ltd. Wirex - CZ-3

SEE DETAILS

CLICK HERE

Wirex - CZ-3

Horizontal Sawmill - 3 x 5,5 kW

Wirex CZ-3 horizontal saw, similarly to the CZ-2 saw, is intended for processing piles of two or three sides exposed or cutting into boards or square timber. It also replaces the circular saw when cutting pallet boards. However, a significant difference can be seen in the performance of the saw, which is significantly higher thanks to the third cutting head.

MSGTP Ltd. Wirex - CZP-2 Vertical Sawmill

SEE DETAILS

CLICK HERE

Wirex CZP-2

Vetical Sawmill - 2 x 5,5 kW, diameter up to 400 mm, length from 500 to 3000 mm

Wirex CZP-2 vertical sawmill may process thin round wood with a diameter up to 400 mm. As a result, one two-sided flitch and two off-cuts are obtained.

MSGTP Ltd. Wirex - CZP-2/ZM Vertical Sawmill

SEE DETAILS

CLICK HERE

Wirex - CZP-2/ZM

Vetical Sawmill - 2 x 11 kW, diameter up to 400 mm, length from 500 to 3000 mm

Wirex CZP-2/ZM saw with a receiving table for edgings is suitable for processing wood with a diameter of up to 420 mm. It cuts a two-sided uncovered prism up to 400 mm wide and two ises that fall by gravity onto the receiving feeder. An automated, industrial version of the saw is also available as an option, complementing full automatic lines for sawing round raw materials.

MSGTP Ltd. Wirex - CZP-3 Vertical Sawmill

SEE DETAILS

CLICK HERE

Wirex - CZP-3

Vertical Sawmill - 3 x 5,5 kW, belt feed

Wirex CZP-3 is designed to process thin as well as medium-sized logs with a diameter of up to 550 mm. As a result, two two-sided flitches (max. thickness 200 mm) are obtained. The middle cutting head is fixed, and the remaining side cutting heads may be adjusted manually or in option automatically. The basic model has main motors of 7,5 kW but when processing logs with bigger diameter it is recommended to install an 11 kW motor in the middle (also optional).

MSGTP Ltd. Wirex - CZP-4 with belt conveyor

SEE DETAILS

CLICK HERE

Wirex - CZP-4

Vertical Sawmill - 4 x 5,5 kW, belt feed

Wirex – CZP-4 with belt conveyor is designed to process one- or two-sided flitches in form of pallet boards, battens, floorboards, and other elements. Input width is no more than 500 mm, and cutting heads maximal extension is 350 mm.  If required, it is possible to shift belt conveyors into a chain feeder (for processing round wood). After such alteration, we obtain two flitches with two offcuts.

MSGTP Ltd. Wirex - CZP-4 with chain conveyor

COMING SOON...

CLICK HERE

Wirex - CZP-4/A

Vertical Sawmill - 4 x 7,5 kW with chain feed

Vertical quadruple band sawmill Wirex – CZP-4/A with chain conveyor may process thin round wood with a diameter of up to 400 mm. As a result, we obtain either one flitch with two planks and offcuts or three flitches at once.

MSGTP Ltd. Wirex - CZP-4/A WZM

COMING SOON...

CLICK HERE

Wirex - CZP-4/A WZM

Vertical Sawmill - 4 x 7,5 kW

Four cutting heads enable to process of either one flitch with two planks on both sides or three flitches at once. Perfect stability of cut is warranted thanks to pneumatic down-holders. Optionally it 4 x 11 kW or 2 x 11 kW motors in the middle and 2 x 7,5 kW on sides – depending on individual requirements.

MSGTP Ltd. Wirex - CZP-4/IL

COMING SOON...

CLICK HERE

Wirex - CZP-4/IL

Vertical Sawmill 4 x 7,5 kW with collecting feeder

Wirex CZP-4/A WZM that may be offered as completion of the professional semi-automatic line for round wood processing. Innovative addition is a round wood rotation system built in the main chain conveyor of the device, which substantially facilitates optimization of the first cut.

MSGTP Ltd. Wirex - Horizontal Line

SEE DETAILS

CLICK HERE

Wirex - Production Line

Complex Automated Horizontal Sawmill fitted to your needs

Wirex semi-automatic production line is a system that perfectly fits your company. Tailor-made production lines are of high interest due to numerous advantages, but mostly due to a decrease in production costs. Let us know about your expectations, what is your production profile, send us the dimensions of your plant and we will take care of the rest.

loading